Using The Cassette Deck (Listening To A Tape) - JVC 20981IEN Instructions Manual

Using the Cassette Deck
(Listening to a Tape)
FM
SLEEP DISPLAY
MODE
TAPE
AUX
FM/AM
TAPE @ #
CD
4
REPEAT UP
PROGRAM SET
RANDOM DOWN
AHB
PRO BASS TREBLE
VOLUME
REMOTE CONTROL RM-SUXV10E
The Cassette Deck allows you to play and record audio tapes.
With Automatic Tape Detection, you can listen to type I, II or
IV tapes without having to change any settings.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
One touch play –––––––––––––––––––––––
By pressing the TAPE @ # button on the Unit or the Remote
Control, the Unit will come on, "TAPE" appears on the display,
and if a tape is in the deck, it will start to play. If no tape is loaded,
the Unit will come on and wait for you to insert a tape, or select
another function.
Standard Play
When the power is already on, you can use this basic procedure:
1 Press the TAPE 0 button on the Unit.
2 When the cassette holder opens, put the
cassette in, with the side you want to
listen to facing up.
• If the cassette holder does not open, turn the Unit off, then
back on and press the TAPE 0 button again.
3 Close the holder gently until it clicks.
4 Press the TAPE @ # button.
The tape is played in the direction shown by the Tape Direction
indicator.
EN10-22.UX-V100[B]f
STANDBY
AUX
REC
REV
MODE
REV. MODE
TAPE
AUTO
PRESET
PHONES
DOWN
CD
¢
7
Tape Direction indicator
CANCEL
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
13
AHB
PRO
VOLUME
TIMER
CLOCK
CD
OPEN/CLOSE
FM/AM CD
TAPE @ #
MULTI CONTROL UP
¢
7
4
Reverse Mode indicator
5 If you need to change the playback
direction, press the TAPE @ # button
again.
The other Tape Direction indicator lights up and the tape
playback direction changes.
To stop playing, press the 7 button.
To remove the tape, stop the tape, and press the TAPE 0 button on
the Unit.
Fast-winding a tape ––––––––––––––––––
Press the ¢ or 4 button to fast-wind the tape.
• The Cassette Deck automatically stops when the tape
reaches its end.
Reverse Mode
You can set the cassette deck to play just one side of a tape, both
sides once, or both sides continuously.
Press the REV. (reverse) MODE button on
the Unit.
The indicator changes at each press of the button as shown.
: The Cassette Deck automatically stops after playing both
sides of the tape. (Stops when playback in the 2
direction is finished.)
: The Cassette Deck continues to play both sides of the
tape until the 7 button is pressed.
: The Cassette Deck automatically stops after playing one
side of the tape.
12/12/00, 12:33 PM
Cassette
holder
AUTO TAPE SELECTOR
TAPE 0
AUTO REVERSE
TAPE
13