Raider RD-LGS01T Original Instruction Manual page 17

17
Watch what you are doing, use common sense and do not operate tool when you are tired;
21. Check damaged parts
Before you use the tool, always carefully check the guarding and other parts to determine that they
will operate properly and perform their intended functions. Check for alignment of moving parts,
binding of moving parts and breakage of parts. Check for proper mounting of all parts and any other
conditions that may affect their operation. A guard, switch or other part that is damaged or defective
should be properly repaired or replaced by a qualified person. Do not use tool, if switch does not turn
it on and off;
22. Warning! Use the tool and its accessories in accordance with these safety instructions and in the
manner intended for the particular tool, taking into account the working conditions and the work to be
performed. Use of the tool for operations, different from those normally expected to be performed by
the particular tool, could result in a hazardous situation;
23. Have the tool repaired by a qualified person
This electric tool is in accordance with the relevant safety rules. Repairs should only be carried out
by qualified persons using original spare parts, otherwise this may result in considerable danger for
the user;
6. Environmental protection.
Never place any electric tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment
and its implementation in national laws, old electric tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the demand to return electrical devices:
As an alternative to returning the electrical device, the owner is obliged to cooperate in ensuring that
the device is properly recycled if ownership is relinquished. This can also be done by handing over
the used device to a returns center, which will dispose of it in accordance with national commercial
and industrial waste management legislation. This does not apply to the accessories and auxiliary
equipment without any electrical components which are included with the used device.