Assembly And Operation; Safety Instructions - Raider RD-LGS01T Original Instruction Manual

12 www.raider.bg
CAUTION!
Read this manual carefully for your own safety before attempting to use the machine!
1. Before starting work, acquaint yourself with the current work instructions and instructions for safety.
2. The size of the log must have the following dimensions (see Figure)
You should not force the machine after an unsuccessful attempt of splitting the log. This can raise the
oil pressure to critical limits!
Recommended oil
The oil which is suitable for RD-LGS01T are:
1. SHELL TELLUS T22
2. ARAL VITAM GF22
3. SP ENERGOL HCP22
4. MOBILE DTE 11 OR equivalent
The machine for splitting wood is a hobby tool and can operate in the temperature conditions in the
range of + 5 ° C to 40 ° C

ASSEMBLY AND OPERATION

Attention! Never operate the machine before you put all parts of the kit!
Attention! Place the machine in a clean area within a radius of 70 cm no items!
Attention! Be sure to install both wheels (2) and the support (4) to ensure stability of the unit.
Attention! Do not use the machine for chopping wood, if it isn't in perfect condition or in need
of repair! Before starting work, check the functionality of all safety devices (ZHB, including the
shutter release button.)

1. SAFETY INSTRUCTIONS

When working with the machine, always observe the instructions manual and attached to the
equipment of the instrument "Safety Instructions".
In this manual, the following symbols are used:
CAUTION! Risk of injury or damage to the instrument.
CAUTION! Before starting work, tool familiarize yourself with the instructions
2. FOR USE
• When plugging-in powerful electric tools occurrence of transient voltage fluctuations in the mains
is possible; under unfavorable circumstances is possible damage to other devices included in the
network (in system impedances less than 0,25 Ω interference is negligible)
• If the cable is damaged or cut during work, DO NOT TOUCH IT; pull out the plug right away ; DO
NOT ever izpolzvayte machine povpeden kabel
• If there's mechanical or electric damage, turn off the machine and the power supply immediately
• In cases of stopping of the power supply or random ejecting of the plug, immediately turn the switch
in non-working position (OFF), to avoid restarting the machine.
2. SAFETY INSTRUCTIONS
1. During work the log splitter should be used by one person.
2. Enquire yourself with this instruction manual before starting work with the machine.
3. The machine must not be used by children!
4. Never wear loose clothing, as well as chains and other jewels . When operating with the machine it
is possible they can fall in moving parts.
5. Position the machine on a level and cleared of various objects. Level the unit before moving on
work with it.
6. Do not place the machine on too high. Maximum of height should be 60-70 cm, and don't equalize
the work surface of the device with the eye level.
7. Before turning RD-LGS01T make sure you haven't forgotten screws and other fasteners from