Change Of Oil - Raider RD-LGS01T Original Instruction Manual

3. Replace the log, having previously put a wooden base, as shown in the following figure.
Attention! You can seriously damage the machine by hitting the logs with a hammer.

4. CHANGE OF OIL

Oil change should be done after 150 hours of work.
1. Make sure all moving parts are stationary.
2. Unscrew the stopgap.
3. Turn the machine for chopping wood in the position in which fluid from the oil tank drained
completely.
4. Place the log splitter to normal position.
5. Insert the new hydraulic oil (use oil from the aforementioned brands). The amount of liquid must
comply with tank capacity (2.2l)
6. Clean around the oil. Replace the cap. Tighten.
7. Check the oil level is between the two traits.
8. Tighten bolts nice and place the machine horizontally.
Attention! Periodically check the hydraulic oil level, it should lies between the two lines.
Attention! Never mix two types of oil.
5. SAFETY INSTRUCTIONS
When using electric tools, the following basic safety precautions should always be followed to reduce
15