Raider RD-LGS01T Original Instruction Manual page 14

14 www.raider.bg
The maximum pressure of the log splitter RD-LGS01T is 4 tons. The setting is made in advance by
a professional mechanic.
Unauthorized intervention can seriously damage the machine.
Safety bolt (14) of pressure is protected by a rubber cap (15).
Attention! Do not remove the rubber cap, and do not make settings to the screw (14).
Log Splitter is equipped with a system "ZHB", which allows you to work with both hands, with the
left hand control the oil pressure in the system, right hand start the machine. Only when both hands
release the buttons, then the piston is brought into the starting position.
Attention! Never race the machine more than 5 seconds under pressure.
If you overreach those 5 seconds the machine can be exposed to serious damage. In case that the
log is not split, this means that the capacity of the machine is less than needed capabilities of the log.
Do not place the log as lean lower part of the tip of the blade (see. The figure below)
Nesting of logs
1. Release both buttons.
2. Once the piston return to outgoing position, remove the logs.