Bluetooth Audio; Bluetooth Audio Operations; Selecting A Source; Playback Operations - JVC KS-BTA200K Instructions Manual

Bluetooth Audio Operations

• Before you use a Bluetooth device on your receiver, connect a Bluetooth device. See "Bluetooth
Connection" on page 12.
• When sound is stopped or interrupted during the use of a Bluetooth device, try the following
remedies.
• Turn Off, then turn On the power to the receiver.
• (When sound is not yet restored,) Connect the device again. See "Connecting/Disconnecting the
device" on page 17.
• For details of the menu operations, refer to the instruction manual supplied with your receiver.
• Indications on the display (monitor) and button names vary among the receivers.
ex. SOURCE: SRC
Bluetooth Audio: Bluetooth AUDIO, BT-AUDIO

Selecting a source

Before you operate the Bluetooth audio device, change
the source to "Bluetooth Audio."
for Type A
You can select "Bluetooth Audio" as the source.
Press SRC repeatedly to select

"Bluetooth Audio."

for Type B/Type C/Type D
You can select "Bluetooth Audio" as the source.
Press SOURCE repeatedly to select
"Bluetooth Audio."
7: 7 / BACK

Playback operations

for Type A/Type B
3:
6:
¢:
4:
7:
for Type C
1:
3:
¢:
4:
for Type D
5:
¢:
4:
Start playback
Start playback/Pause
Forward skip
Reverse skip
Stop
Start playback
Stop
Forward skip
Reverse skip
Start playback
Forward skip
Reverse skip
Bluetooth Phone/Bluetooth Audio 29