Playing Back A Tape - JVC HX-GX7 Instructions Manual

To select a track
While playing a disc...
Increases the track numbers.
Decreases the track numbers.
To locate a particular portion
While playing a disc, press and hold the button until the
portion you want is reached.
Fast-forwards the track.
Fast-reverses the track.
• You can also use 1/¡ on the unit.
To select a track directly

Playing Back a Tape

To insert a tape
You can play back type I tapes.
• The use of C-120 or longer tape is not recommended.
Examples:
To select track 5, press 5.
To select track 15, press +10,
then 5.
To select track 30, press +10,
+10, then 10.
Push
Insert
Close
To start:
To rewind tape:
Before or after play...
• You can also use 1/¡ on the unit.
To change the tape running direction
To reverse the tape automatically
REVERSE
MODE
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
To locate the beginning or next of a recording—
Music Scan
During play, designate where the recording you want is
located—specify how many recordings need to be skipped
on the tape.
• You can also use 1/¡ on the unit.
To stop:
Rewind the tape to the right.
Rewind the tape to the left.
3 (forward)
2 (reverse)
Main Unit
ONLY
Searches for the beginning of
the recording to the right.
Searches for the beginning of
the recording to the left.
11