Playing Back Tapes; Playing Back A Tape - JVC CA-MXK5R Instructions Manual

Playing Back Tapes

Playing Back a Tape

1
Press EJECT (0) for the deck you want to
use.
For Deck A
2
Put a cassette in with the exposed part of the
tape down.
• You can play back only type I.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control).
4
Press TAPE 3.
The tape play starts and the tape running
indicator (3) starts flashing slowly.
When the tape plays to the end, the deck
automatically stops.
To stop during play, press 7.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control), then TAPE 3.
To fast-forward the tape, press ¡ (or ¢ on the remote
control). The tape direction indicator (3) starts flashing
quickly.
To rewind the tape, press 1 (or 4 on the remote
control). The tape direction indicator (2) starts flashing
quickly.
To remove the cassette, press 0 EJECT for deck A or
EJECT 0 for deck B.
For Deck B
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
TAPE
– 17 –