Grounding Instructions - Greenlee 555RSC Instruction Manual

Grounding Instructions

Electric shock hazard:
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 20 amp ground
fault protected circuit.
Failure to observe these warnings
could result in severe injury or death.
Greenlee Tools, Inc.
555C Electric Bender Classic
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock.
This tool's electric cord has a grounding conductor and
a grounding plug as shown. Do not modify the plug.
Connect the plug to a corresponding GFCI-protected
receptacle that is properly installed and grounded
in accordance with all national and local codes and
ordinances.
Do not use an adapter.
NEMA L5-20 Twist-Lock
20 Amp/120 Volt
Plug and Receptacle
Plug
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Receptacle