Table of Contents
Advertisement
ABOUT THE POWER GRIP
Record A Scene
Insert a cassette and try recording.
** The camcorder's battery and the Power Grip battery packs cannot be used at the same time. If both are installed, the
Power Grip battery packs become the power source. When the Power Grip Battery Packs near complete discharge
(when the Power Lamp begins blinking), set the camcorder to RECORD/STANDBY mode, set the Power Dial to
"OFF" and detach the Power Grip DC Cord from the camcorder. Then turn the camcorder's power back on.
EN-14
(Cont.)
1
RECORDING
START/STOP Button
3
Power Lamp Lights
OFF
5S
Power Lamp Lights
Blinks*
Extinguishes (Batteries
have discharged)
Viewfinder
PAUSE
Record/Standby
Mode
*Depending on the temperature,
the time from when the Power
Lamp begins blinking to when it
goes out will vary (it takes
longer in colder temperatures).
2
Advertisement
Table of Contents
