Table of Contents
Advertisement
Remove the camcorder's connector
1
cover as indicated by 1, 2.
• In 2, rotate the cover in the direction
indicated by the arrow, then remove it.
• After use, follow 3, 4 to re-attach the
cover.
2
Insert the tips of the metal fittings on
the Power Grip deep into the corre-
sponding slots on the camcorder (1),
then attach the case (2).
3
Turn the unit around, then turn the screw
in the direction indicated by the arrow.
• Continue turning the screw until it stops.
Connect the DC Plug on the Power
4
Grip to the DC Input Connector on the
camcorder.
• Do not pull on the DC Cord, as this can
result in malfunctions.
Adjust The Grip Band
1
Detach the pad.
2
While holding the camcorder securely,
adjust the grip band on the Power Grip.
• Adjust so your thumb can easily reach the
Zoom Lever and the RECORDING START/
STOP button.
3
Re-attach the pad.
Grip Band
Pad
EN-13
Advertisement
Table of Contents
