What You Get; What You Need - Intermec EasyCoder PX4i Installation Instructions Manual

What Is the RFID Kit?
The RFID kit provides RFID functionality for the EasyCoder
PX4i and PX6i printers. With this kit installed, the PX4i or PX6i
printer can read and write to RFID tags.
These instructions describe how to install these RFID kits:
•
•
•
•
For more information about using RFID features on the
PX4i or PX6i, see the EasyCoder Printer RFID User's Guide
(P/N 934-041-xxx).

What You Get

•
•
•
•
•
•

What You Need

•
•
•
EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions
PX4i 915 MHz RFID Kit (P/N 270-153-001)
PX4i 869 MHz RFID Kit (P/N 270-155-001)
PX6i 915 MHz RFID Kit (P/N 270-154-001)
PX6i 869 MHz RFID Kit (P/N 270-156-001)
One of these I/O interface boards:
• I/O interface board with IM4 869 MHz radio module
• I/O interface board with IM4 915 MHz radio module
One of these lower media guides:
• PX4i lower media guide with RFID antenna
• PX6i lower media guide with RFID antenna
Dual slot I/O cable
M3x5 screw (2)
M4x5 screw
Spacer screw
A PX4i or PX6i printer running Fingerprint v8.76.0 or later
or IPL v2.76.0 or later. You can download the latest version of
firmware from the Intermec web site at www.intermec.com.
A #T10 and a #T20 Torx screwdriver.
A slotted screwdriver.
®
3