Ceiling Support - MIMSAL MS User Manual

3.6 CEILING SUPPORT

MODEL
CEILING SUPPORT
* Not compatible with MS LED, MS LED PLUS, MS FLEX and MS FLEX PLUS.
Install the accessory without the lighting unit installed on it.
It is the customer's responsibility to ensure that the surface that it is attached to is
secure and sufficiently strong.
Check regularly that the unit is still stable in order to avoid the possibility of the
lighting unit falling down.
The bracket is only designed to support the weight of the lamp. If additional weight is
added, this may cause damage to the lighting unit and/or injury to the user.
1. Parts of the Ceiling Support
1. Pole fastening screws
2. Ceiling rose
3. Pole
4. Support
5. Support round head wing screw
6. Locking ring
7. Pole plug
8. Articulated arm wing screw
9. Fastening screws
10. Upper fastening holes (3)
11. Lower fastening holes (2)
2. Adjustment of measurements
The support tube can be adjusted to the desired measurement.
Optimum height of the lower part of the support estimated at 190 to 200cm.
Recommended length according to height of ceiling:
CEILING HEIGHT
300 cm
280 cm
260 cm
240 cm
Ceiling bracket included in the MS CEILING and MS CEILING PLUS models.
LENGTH OF SUPPORT
100 cm
80 cm
60 cm
40 cm
DESCRIPTION
ENG
11
13