Product Use - universalblue UBH2300-21 User Manual

When you need to replace the fuse, please make sure that the
electrical connection is as follows:
• Brown wire to the phase (live end)
• Blue wire to neutral
• Yellow-green wire to ground terminal
The circuit breaker switches of the oven shall be placed so that end
user can reach them when the oven is installed.
The power supply cord (the cord with plug) shall not contact the hot
parts of the appliance.
If the power supply cord (the cord with plug) is damaged, this cord
shall be replaced by the manufacturer or its service agent or an
equally qualified personnel to prevent a hazardous situation.

5. PRODUCT USE

Initial operation of the oven
After you have made the necessary connections of your oven
according to the instructions, you shall need to do the following in
the initial
operation:
1. Take out any labels or accessories that are affixed inside the
oven. If there is a protective foil on the front of the appliance,
remove it.
2. Wipe the inside of the oven with a wet cloth to remove the
dust and the remains of packaging. Inside of the oven shall
be empty. Plug the appliance.
3. Set the thermostat button to the highest temperature (Max.
240 ° C), and operate the oven for 30 minutes with its door
closed. At this time, little amount of smoke and smell may
occur; this is normal.
61