Operation And Safety Decals - MULTIQUIP Mikasa Series Operation And Parts Manual

Machine Safety Decals
The MVC-64E/EW Plate Compactor is equipped with a number of safety decals. These decals are provided for operator safety and
maintenance information. The illustration below shows these decals as they appear on the machine. Should any of these decals
become unreadable, replacements can be obtained from your dealer.
" READ OWNER'S SERVICE MANUAL BEFORE OPERATING OR
SERVICING THIS MACHINE.
" ALWAYS KEEP UNAUTHORIZED, INEXPERIENCED,
UNTRAINED PEOPLE AWAY FROM THIS MACHINE.
" MAKE SURE ALL SAFETY DEVICES ARE OPERATIONAL
BEFORE THIS MACHINE IS STARTED. BE SURE ENGINE
IS TURNED OFF AND SPARK PLUGS ARE DISCONNECTED
BEFORE SERVICING THE MACHINE OR COMING IN
CONTACT WITH ANY MOVING PART. IF EQUIPMENT IS
POWERED BY AN ELECTRIC MOTOR, DISCONNECT
ELECTRICAL PLUG.
" NEVER LEAVE MACHINE UNATTENDED WHEN OPERATING.
ALWAYS STOP ENGINE AND ALLOW ENGINE TO COOL
BEFORE ADDING FUEL OR OIL.
P/N: 920203290
Serial No.
Model No.
PARTS DEPT.
PAGE 12 — MVC-64E/EW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (05/11/06)
MVC-64E/EW— OPERATION AND SAFETY DECALS
CAUTION !
CONTACT
Figure 2. Operation and Safety Decals
l
*
NPA-329
NPA-989
P/N 9202039890
*