Before You Begin; Safety Guidelines; Safety Voltages - National Instruments NI-9232 Getting Started

Before You Begin

Read the NI-9232 Safety, Environmental, and Regulatory Information and
complete the software and hardware installation procedures in your chassis
documentation.

Safety Guidelines

Caution
Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.

Safety Voltages

Connect only voltages that are within the following limits.
Isolation
Channel-to-channel
Channel-to-earth ground
Continuous 60 V DC, Measurement Category I
Withstand 1,000 V RMS, verified by a 5 s dielectric withstand test
Safety Guidelines for Hazardous Locations
The NI-9232 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous
locations; Class I, Zone 2, AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations;
Suivez toutes les instructions et respectez toutes les mises
NI-9232 Getting Started
None
© National Instruments
3