Table of Contents
Advertisement
Before Operation - VCR Part (Continued)
Setting the VCR Setup Menu
1 1
Press MENU and the MAIN menu will appear.
2 2
Press v v /V V to select the SETUP menu, then
press SELECT/ENTER ( ).
The SETUP menu will appear.
3 3
Use v v /V V to choose an option from the SETUP
menu, then use b b /B B to choose a setting.
FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or
off.
FUNCTION OSD can be switched between ON and OFF by
pressing b/B.
4 4
Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
1 1
Press MENU and the MAIN menu will appear.
2 2
Press v v /V V to select the TUNING menu, then
press SELECT/ENTER ( ).
The TUNING menu will appear.
3 3
Press V V to choose the SOURCE SELECT option,
then press b b /B B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1
and LINE2.
4 4
Press v v /V V to choose the AUTO CHANNEL SET
option, then press b b /B B to set the channel.
The tuner will automatically cycle through all
••
available channels (TV/CATV) in the area and
place them in the tuner’' s memory.
After the AUTO CHANNEL SET is complete, the
••
TUNING menu will hide and return to the TV
screen automatically.
5 5
Make sure the TUNING BAND is set appropriate-
ly (TV or CATV).
•• TV : If you are using a standard antenna to
receive channels.
CATV : If you are using basic cable to receive
channels.
•• Change the setting of TUNING BAND to check the
TV channels.
6 6
Use CH/TRK (v v /V V ) on the remote control or
CHANNEL (V V / / v v ) on the front panel to cycle the
DVD+VCR through the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMO-
RY
This feature allows you to add or erase channels from
memory manually.
1 Press V V to choose the CH. ADD/DEL option on the
TUNING menu. Press b/B to select a channel to
add or erase.
2 Press SELECT/ENTER ( ) to add or erase the
channel.
Repeat steps 1 and 2 to add or erase channels.
3 Press MENU to return to the TV screen.
15
Advertisement
Table of Contents
