Front Panel - Sanyo DVW7100OM Instruction Manual

Front Panel

POWER
Switches the DVD+VCR ON and OFF.
DVD/VCR SELECT (output select)
Select one of your output sources to
view on the TV screen between DVD
and VCR.
Disc Tray (DVD deck)
Insert a disc here.
PLAY (B B )
Starts playback of a disc or tape.
FF(M)
DVD: Go to NEXT chapter/track. Press
and hold for a fast forward search.
VCR: Advances the tape from STOP
mode or for fast forward picture
search.
REW (m)
DVD: Go to beginning of current
chapter/track or to previous chapter/track.
Press and hold for a fast reverse search.
VCR: Rewinds the tape from STOP mode or
for fast reverse picture search.
Display window
Shows the current status of the
DVD+VCR.
Indicates the active VCR
DVD indicator
Indicates the active DVD deck.
OPEN/CLOSE (Z Z )
Opens or closes the disc tray.
PAUSE/STILL(X X )
Pause playback temporarily/press
repeatedly for Frame-by-Frame play-
back.
STOP (x x )
Stops playback of the disc or tape.
AV INPUT (VIDEO IN/AUDIO IN)
Connect the audio/video output of an exter-
nal source (Audio system, TV/Monitor,
Cassette Compartment
(VCR deck)
Insert a video cassette here.
Remote Sensor
Point the DVD+VCR
remote control here.
VCR indicator
deck.
CHANNEL (V V / / v v )
To scan up or down through mem-
orized channels.
Child Lock
The control buttons on the front panel of the
DVD+VCR can be switched off so that your
DVD+VCR can only be operated using the
remote control.
Press SAFE on the remote control to enable
LOCK function, SAFE and
display window.
To disable the LOCK function, press SAFE on
the remote control until OFF appears in the
display window.
Another VCR).
EJECT(Z Z )
Ejects the tape in the
VCR deck.
REC (z z )
To record normally or to acti-
vate Instant Timer
Recording.
appear in the
7