Table of Contents
Advertisement
Before Operation - VCR Part
On-Screen Display (OSD)
Some of these functions will be displayed every time the
VCR is operated.
‚
ƒ
PLAY
SP
OCT 8 , FRI
…
‚ TAPE SPEED DISPLAY
Shows the current tape speed.
ƒ FUNCTION DISPLAY
Indicates the current function.
„ CHANNEL DISPLAY
Indicates the selected channel (or LINE1, LINE2).
… DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
† CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Each press of the SELECT/ENTER ( ) changes the TV
screen in the following sequence.
STOP
CH 4
SP
OCT 8 , FRI
2:15 PM
2:15 PM
otes
The function displays can be seen displayed on the TV
screen for 5 seconds.
The clock (or tape counter, tape remaining) mode will contin-
ue until you press SELECT/ENTER ( ).
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
14
„
CH 4
2:15 PM
†
0:35:40
REM 1:58
EASY INFORMATION
If the Extended Data Service (XDS) signals are provided
along with normal TV signal in your area or during play-
back of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title and program
details are shown in the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press SELECT/ENTER ( ) then the sta-
tion ID will appear on the TV screen. Press
SELECT/ENTER ( ) again and the program details will
appear on the TV screen. When viewing a tape record-
ed with Extended Data Service (XDS) signals, press
SELECT/ENTER ( ) twice then the program title and
program details will appear on the TV screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
CH 4
SP
WABC
“"Home video”"
OCT 8 , FRI
2:15 PM
Easy Information Screen
(Station ID)
Setting the On-Screen Display
The SETUP, clock setting, and timer recordings are
accessed conveniently with On-Screen Menu Displays
that lead you through each step. The following pages
describe the On-screen selections to be set.
Menu Selection
Your VCR allows remote control adjustment of several
features.
1 1
Press MENU and the MAIN menu will appear.
2 2
Select the desired menu with v/V button and
then press SELECT/ENTER ( ).
ote
Menus remain on-screen for 3 minutes.
MAIN MENU
3 3
Press MENU when finished.
PROGRAM DETAILS
“"Home video”"
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
CLOCK SET (page 16)
PROGRAM (page 22)
TUNING (page 15)
SETUP (page 15)
Advertisement
Table of Contents
