Table of Contents
Advertisement
Before Operation - VCR Part (Continued)
Setting the VCR Setup Menu
Press MENU and the MAIN menu will appear.
1 1
Press v v /V V to select the VCR SETUP menu, then
2 2
press SELECT/ENTER.
The VCR SETUP menu will appear.
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
SELECT
ENTER
TO EXIT PRESS
Press v v /V V to choose a desired option on the
3 3
VCR SETUP menu. Then press b b /B B to choose a
desired setting.
SCREEN DISPLAY
The on-screen display of this DVD+VCR can be turned on or off.
SCREEN DISPLAY can be switched between ON and OFF
by pressing b/B.
LANGUAGE
The on-screen programming of this DVD+VCR can be
displayed in either English, Spanish, or French.
LANGUAGE can be switched among ENGLISH, SPANISH
and FRENCH by pressing b/B.
AUDIO MODE
The DVD+VCR has two separate audio playback systems, the
high quality VHS Hi-Fi system and standard NORMAL mono
system. The same audio is generally recorded on both
systems. The VHS Hi-Fi system plays on separate (left and
right) channels, and the NORMAL system plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD+VCR that does not have VHS Hi-Fi.
AUDIO MODE can be switched between HI-FI and
NORMAL by pressing b/B.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAP signals are
received. When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For
normal operation, the display should be in the STEREO position.
The DVD+VCR will then record a STEREO program when available,
and record a mono program IF the program is NOT IN STEREO.
For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
BROADCAST TYPE can be switched among STEREO, SAP,
and MONO by pressing b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched among STEREO, LEFT,
and RIGHT by pressing b/B.
16
SCREEN DISPLAY:
ON
LANGUAGE:
AUDIO MODE:
BROADCAST TYPE:
AUDIO OUTPUT:
SELECT
ADJUST
TO EXIT PRESS
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 12.
AUTO CHANNEL PROGRAMMING
Press MENU and the MAIN menu will appear.
1 1
Press v v /V V to select the CHANNEL SETUP menu,
2 2
then press SELECT/ENTER.
The CHANNEL SETUP menu will appear.
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
SELECT
ENTER
TO EXIT PRESS
Press V V to choose the INPUT SELECT option,
3 3
then press b b /B B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1
and LINE2.
Press v v /V V to choose the AUTO CHANNEL SEARCH
4 4
option, then press b b /B B to set the channel.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner's memory.
After the AUTO CHANNEL SEARCH PROCEED-
5 5
ING is complete, make sure the CHANNEL
SOURCE is set appropriately (TV or CATV) by
pressing v v /V V and choosing the correct CHAN-
NEL SOURCE (TV or CATV) by pressing b b /B B
using the CHANNEL SETUP menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
Press MENU to return to the TV screen.
6 6
Use CH/TRK (v v /V V ) or CHANNEL (v v /V V ) on the
7 7
front panel to cycle the DVD+VCR through the
channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from
memory manually.
1 Press V V to choose the ADD/DEL CH option on the
CHANNEL SETUP menu. Press b/B to select a
channel to add or erase.
2 Press SELECT/ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3 Press MENU to return to the TV screen.
AUTO CHANNEL SEARCH
CHANNEL SOURCE:
ADD/DEL CH:
INPUT SLECT:
Advertisement
Table of Contents
