Routine Cleaning & Disinfection - Code CR2700 User Manual

14. Maintenance & Troubleshooting (continued)
14.2 Routine Cleaning and Disinfection
To maintain the highest performance of Code products, please follow the steps described below for
routine maintenance and cleaning. Failure to follow proper cleaning procedures or using unapproved
cleaners may result in the product warranty being voided.
Use only approved disinfectants and follow the instructions provided by the disinfectant manufacturers to
clean and disinfect the devices. To prevent electric shock, always disconnect the charger from its power
source before cleaning. Gently wipe plastic cases of the reader with battery installed and charging station
with approved disinfectants. Never pour or spread liquid directly on the device. Do not remove the battery
to clean the metal contacts on the battery or inside the battery compartment.
A dirty scan window will impact scanning performance. Never use any abrasive material to clean the
window. Should the window become dirty, use a damp lint/dust free (or microfiber) cloth to wipe the
window clean and allow air dry before use. Never spray any liquid directly on to the window. Never allow
any liquid to pool around the window. Avoid using any liquid which may leave a residue or streaks on the
window as it may impact scan performance.
35
D032263_03_CR2700_User_Manual