Welding Tee Joints; Welding Lap Joints - Miller Shielded Metal Arc Welding Manuallines

3-12. Welding Tee Joints

3-13. Welding Lap Joints

1
°
45
Or Less
2
2
1
3
°
30
Or Less
1
2
Single-Layer Fillet Weld
°
30
Or Less
1
3
Multi-Layer Fillet Weld
1 Electrode
2 Fillet Weld
Keep arc short and move at definite
rate of speed. Hold electrode as
shown to provide fusion into the
corner. Square edge of the weld
surface.
For maximum strength weld both
sides of upright section.
3 Multi-Layer Deposits
Weld a second layer when a heavi-
er fillet is needed. Use any of the
weaving patterns shown in Section
3-6. Remove slag before making
another weld pass.
S-0060 / S-0058-A / S-0061
1 Electrode
2 Single-Layer Fillet Weld
Move electrode in circular motion.
3 Multi-Layer Fillet Weld
Weld a second layer when a heavi-
er fillet is needed. Remove slag be-
fore making another weld pass.
Weld both sides of joint for maxi-
mum strength.
S-0063 / S-0064
155 095 Page 15
www.manaraa.com