Advertisement
Specifications
†
Overall System
Frequency Range
Modulation Mode
Number of Frequencies
Operating Range
Frequency Response
Frequency Stability
Receiver Specifications
Receiver System
Image Rejection
Dynamic Range
Sensitivity
Total Harmonic Distortion
Level Control
Antenna Input
Audio Output
Output Connectors
Dimensions
Weight
Accessories Included
Optional System Accessory
8
DE3: 482 - 492 MHz, 495 - 512 MHz
HH2: 824 - 831 MHz, 863 - 865 MHz
FM
2 x 4 frequencies
60 m, typical
60 HZ - 16 kHz
+/- 0.005%, phase lock loop
frequency control
Antenna switching diversity
55 dB minimum
HH: 108 dB BP: 103 dB
(@ max deviation)
10 dBµV (S/N 60 dB
@ 20 kHz deviation)
<1% - 20 kHz deviation @ 1 kHz
Mic / Line (0/-20 dB)
BNC type, 50 ohms - BIAS voltage
12 V DC 100 mA each
Unbalanced -2 dBV, Balanced +4 dBV
Unbalanced: ¼" (6.3 mm) mono jack,
Balanced: XLRM-type
200 mm (7.87") W x 42 mm (1.65") H
x 122 mm (4.80") D
418 g (14.74 oz) without accessories
AC Adapter, Antennas, Rack-mount
adapter, Protective carrying case
AT8677 Dual rack mount kit
Body-Pack Transmitter
RF Output Power
Spurious Emissions
Input Connections
Batteries (not included)
Battery Life
Dimensions
Weight
Handheld Transmitter
RF Output Power
Spurious Emissions
Microphone Element
Batteries (not included)
Battery Life
Dimensions
Weight
Accessories included
† In the interest of standards development, A.T.U.S. offers full details on its test methods to
other industry professionals on request. Specifications are subject to change without notice.
10 mW
Following federal and
national regulations
Pin 1: GND
Pin 2: INST
Pin 3: Mic
Pin 4: DC Bias + 10 V
Two 1.5 V AA alkaline
10 hours - depending on battery
type and use pattern
66 mm (2.60") W x 98 mm (3.86") H
x 22 mm (0.87") D
71 g (2.5 oz) without batteries
10 mW
Following federal and
national regulations
Cardioid condenser
Two 1.5 V AA alkaline
10 hours - depending on battery
type and use pattern
268 mm (10.55") long,
52 mm (2.05") diameter
277 g (9.8 oz) without batteries
Stand clamp
Advertisement
