Additional Information; Learning More About This System - JVC SP-UXE15 Instructions Manual

Additional Information

Learning More about This System

Daily Operations—Playback
Listening to the Radio:
• If you store a new station into an occupied
preset number, the previously stored station in
that number will be erased.
• When you unplug the AC power cord or if a
power failure occurs, the preset stations will
be erased in a few days. If this happens, preset
the stations again.
Playing Back a Disc/USB Memory/DAP:
• This System cannot play "packet write" discs.
• For MP3/WMA playback...
– MP3/WMA discs are required a longer
readout time than regular CDs. (It depends
on the complexity of the group/fi le
confi guration.)
– Some MP3/WMA fi les cannot be played back
and will be skipped.
This result from their recording processes
and conditions.
– When making MP3/WMA discs, use ISO
9660 Level 1 for the disc format.
– This System can play back MP3/WMA fi les
with the extension code <.mp3> or <.wma>
(regardless of the letter case—upper/lower).
– Some characters or symbols will not be
shown correctly on the display.
The maximum character number shown
on the display is 32 (without the extension
code) for fi les, and 30 for ID3 tag.
– It is recommended that you make each MP3
fi le at a sampling rate of 44.1 kHz and at a bit
rate of 128 kbps. Similarly each WMA fi le at
a sampling rate of 44.1 kHz and at a bit rate
of 96 kbps.
– This System can recognize the total of
999 tracks and of 500 groups. Those
exceeding the maximum number cannot be
recognized.
– Playback order of MP3/WMA tracks may be
different from the one you have intended
while recording. If a folder does not include
MP3/WMA tracks, they are ignored.
Receiving FM stations with Radio Data System
• If an "Alarm !" (Emergency) signal is
(see pages 9 to 17)
Adjusting the Volume:
• Be sure to turn down the volume before
Adjusting the Sound:
• This function also affects the sound through
Setting the Clock:
• "00:00" will fl ash on the display until you set
• The clock may gain or lose 1 to 2 minutes per
Programming the Playing Order — Program Play:
• If you try to program a 32nd track, "FULL
• While programming steps...
• When you unplug the AC power cord or if a
• If you activate Sleep Timer, Daily Timer, and
received from a station while listening to
the FM station with Radio Data System, the
system automatically switches to the station
broadcasting the "Alarm !" signal, except when
you are listening to non-Radio Data System
stations (all AM and some FM stations).
Daily Operations — Sound & Other
Adjustments
(see pages 18 to 20)
connecting or putting the headphones.
the headphones.
the clock.
month. If this happens, reset the clock.
Advanced Disc/USB Memory/DAP Operations
(see pages 21 to 23)
MEMORY" appears on the display.
Your entry will be ignored if you have tried to
program an item number that does not exist
on the disc (for example, selecting track 14 on
a disc that only has 12 tracks).
Timer Operations
(see pages 24 and 25)
power failure occurs, the timer settings you
entered will be erased. You need to set the
clock fi rst, then the timer again.
Auto Standby simultaneously, the function
that is set for the earliest time will be
performed.
26