Getting Started; Step 1: Unpack; Step 2: Prepare The Remote Control - JVC SP-UXE15 Instructions Manual

Getting Started

Step 1:
Unpack the package and check the
accessories.
Step 2:
Prepare the remote control.
Step 3:
Hook up the components such as
AM/FM antennas, speakers, etc. (see
pages 5 to 7).
Finally plug the AC power cord.
Now you can operate the System.

Step 1: Unpack

After unpacking, check to be sure that you
have all the following items. The number in
parentheses indicates the quantity of each piece
supplied.
• FM antenna (1)
• AM loop antenna (1)
• Speaker cords (2)
• Remote control (1)
• Batteries (2)
If any item is missing, consult your dealer immediately.

Step 2: Prepare the Remote Control

Insert the batteries into the remote control by
matching the polarity (+ and –) correctly.
1
2
3
• DO NOT use an old battery together with
a new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or
fl ame.
• DO NOT leave the batteries in the battery
compartment when you are not going to
use the remote control for an extended
period of time. Otherwise, the remote
control will be damaged from battery
leakage.
R6P(SUM-3) / AA (15F)
4