Ease Of Use - Huawei VP9660 Manual

Huawei VP9660
Product Overview

4.5 Ease of Use

The VP9660 provides an intuitive web interface to simplify conferencing operations and
improve user experience.
Web Interface
l
l
SMC2.0-based Conference Control
The VP9660 can be managed by the SMC2.0. In this way, the VP9660 can be used in the
enterprise on-premises solution to provide multipoint conferencing functions.
Connection to eSight
The VP9660 can connect to eSight through the SNMP V3 protocol. Using eSight, the
administrator uniformly manages NEs, for example, viewing basic information about the
MCU and managing its alarms.
Easy-to-Use Services
l
l
l
Issue 08 (2018-11-21)
A computer that has a browser installed is all you need to manage the MCU.
The VP9660 provides a built-in web server. You can configure the VP9660 as you would
on a network management system.
Multiple conference joining modes and conference control functions
– Huawei proposes an unattended MCU so that all conference operations can be
performed from an endpoint. A user can initiate a multipoint conference using their
video terminal's address book without the need for conference predefinition or
interference by maintenance personnel.
– VP9660 operations can be performed on the SMC2.0, which allows for centralized
management of conferences.
– The VP9660 supports various conference joining modes, including:
– Ad hoc conference
– Special service number
– One click to join conference
– A videoconferencing endpoint can also dial the H.323 ID, email address, or URL
address, in addition to the IP address, to create or join a conference.
Automatic continuous presence
After a conference starts, the VP9660 automatically enables continuous presence if you
have not set continuous presence parameters. If a site joins or exits a conference, the
VP9660 automatically adjusts the continuous presence video feeds and changes the
layout to maintain the best effect.
DTMF conference control on endpoints
VP9660 supports DTMF conference control performed with the number 2, 4, 6, 8 and
arrow keys for far end camera control (FECC). From the videoconferencing endpoint,
users can press the number 4 key to view the video of the other sites in the conference
and press 6 to view the conference presentation. By pressing 2 and 8, users can switch
between continuous presence layouts.
Copyright © Huawei Technologies Co., Ltd.
4 Features and Benefits
26