Huawei VP9660 Manual page 23

Huawei VP9660
Product Overview
Indica
tor
RUN
GE/FE
Media+ Board
The media+ board transcodes audio and video streams. You can choose whether to install
media+ boards.slots 2 to 9 shown in
the VP9660.
RSE-M Board
The RSE-M board is an optional service board of the VP9660. This board can be inserted into
any service board slots and offers the following functions: Allows conference recording, live
broadcast, and video on demand (VoD). You are advised to insert it into slot 9. Allows users
to manage programs, users, and the system and to control the recording process from the
board web interface. Collaborates with a service management system, such as the HUAWEI
Service Management Center (SMC) 2.0, to provide a complete videoconferencing recording
solution.
Table 3-7
Issue 08 (2018-11-21)
Status
Steady red
Steady green
Off
Slow blinking (about 0.5 Hz,
once every 2 seconds)
Quick blinking (about 4 Hz,
four times per second)
Steady green
Green off
Blinking orange
Orange off
NOTE
After the VP9660 starts properly, the RUN indicators on all the boards are supposed to be in the same
state. If the states are different, the handshake between main control and service boards may fail. Check
whether the version numbers for all boards. If the version numbers are different, update the boards to the
latest version. If the version numbers are the same, remove and re-insert the boards.
NOTE
The media+ board does not provide the ACT indicator. The other indicators listed in
same as those on the HCCB board.
describes the indicators in the RSE-M board front panel.
Copyright © Huawei Technologies Co., Ltd.
Description
The board is malfunctioning.
The board is powered on but is malfunctioning.
The board is not powered on or the board fails
to start.
The board is operating correctly according to
the configuration.
The board is loading programs.
The network port connection is normal.
No connection is established on the network
port or the connection is faulty.
Data is being received or sent through the
network port.
No data is being received or sent through the
network port.
Figure 3-8. You must install at least one media board in
3 Product Structure
4.2-Boards are the
20