Saving Projects To Usb Flash Drives - Zoom MultiTrak R12 Operation Manual

Saving projects to USB flash drives
Projects are saved to microSD cards, but backups can also be saved to USB flash drives.
Projects will be saved in the ZOOM_R12 > PROJECT folder on a USB flash drive.
1.
Connect a USB flash drive to the USB (Type-C) port (→
2.
Tap "Export To USB Memory" in the Project Option Menu (→
project that you want to save.
This opens the Project Name Input Screen.
3.
Input the project name.
See Character Input Screen overview
NOTE:
• An error message will appear if a project with the same name already exists. If this happens, change the
project name.
• Saving is not possible if a USB flash drive does not have enough open space.
• Usable project names can have a maximum of 50 characters, including their extensions.
4.
When "Done" appears, tap "Close".
This completes saving and reopens the Project Option Screen.
Connecting USB flash
for how to input characters.
146
drives).
Opening the Project Option Menu) of the