Zoom MultiTrak R12 Operation Manual page 111

Adding/deleting notes
Notes can be added and used to play synth sounds using their pitch, length and velocity data.
1.
On the Piano Roll Screen, tap
2.
Add a note.
Tap the Piano Roll to add a region and note at that position.
HINT:
• The pitch of the note will be the same as on the piano keyboard shown at the left edge. Scroll up/down to
raise/lower the octave.
• When the place where a note will be added is tapped, vertical guidelines will be shown, allowing the
position to be checked as the note is added.
3.
Delete a note.
Tap a note to delete it. The remaining region will not be deleted.
to turn this function on (
111
) ( is off).