Adjusting effect parameters
1.
Tap the effect you want to edit on the patch memory Edit Screen (→
Screen).
This opens the Effect Settings Screen.
2.
Adjust the effect.
❶
Return to the patch memory Edit Screen
❷
Replace effects
Tap this to open the Effect List Screen. Then, tap the desired effect to select it.
❸
Effect on/off
Tap this to turn the effect on/off.
❹
Effect adjustment parameters
Slide the patch memory sliders or tap
NOTE:
• Three effects can be combined as desired in a patch memory. If the processing capability limit is
exceeded, however, a "Process Overflow" warning will appear and effects will be bypassed. Change one of
the effects to end this condition.
• The parameters that can be adjusted depend on the effect.
and
to adjust the parameters.
75
Opening the patch memory Edit