Cleaning The Faucet Parts And Site Gauge - Curtis G4 ThermoProX User Manual

Cleaning the Faucet Parts and Site Gauge

6 Wash - Wash all faucet and gauge glass parts with
the detergent solution. Using the supplied brush,
clean inside the fi ll tube on the lid. Clean the inside
of the gauge glass with a gauge brush soaked with
detergent solution.
6 Rinse - Thoroughly rinse all parts with clean, warm
water.
6 Sanitize - After rinsing, place all faucet and gauge
parts in a sink to be sanitized. Immerse them in
a commercial sanitizer suitable for food grade
applications. Sanitize according to the directions on
the package.
6 Air Dry - Allow all parts to thoroughly air dry.
6 Reassemble - When dry, reassemble the handle/
bonnet. Hand tighten the handle/bonnet onto
the top of the faucet assembly, reinstall the site
gauge and cover. If replacing a broken gauge glass,
carefully remove any traces of glass from the
silicone parts before inserting the new gauge glass
tube. Reinstall the lid.
User manual Curtis G4 ThermoProX
Care | Daily cleaning
33