Curtis G4 ThermoProX User Manual page 23

6 Slide the fi lled brew basket into the brew rails under
the control panel. Slide it all the way back until it
stops.
6 Hold your fi nger on the appropriate brew icon. As
soon as you hear the click of the brew valve, lift
your fi nger. Brewing will begin.
6 If a keypad appears on the display, the brew code
feature is enabled (default is OFF). Brewing will start
immediately after you enter the brew code.
The brewer will brew coffee based on the settings
programmed into the universal control module (UCM).
User manual Curtis G4 ThermoProX
Operation | Brewing
Set up/disable the brew code
 P rogramming guide
page 25
Change settings
 P rogramming guide
page 25
23