Table of Contents
Advertisement
Attaching the Cable Clamps (securing the unit to a cable)
• For more information on mounting a ceiling railing,
refer to page 12.
1
Remove the screw
and separate parts
A and B.
2
Secure parts B and
C to the cable with
the screws.
Clamp
segment B
M3 x 6 mm screws (included)
3
Insert metal fixture
A and secure with
the screw.
Clamp segment A
4
Fit the transmitter
onto the secured
mount.
Loosen this screw to adjust
the angle of the transmitter.
• Use the support arms when a twisted cable causes
Clamp segment A
Clamp segment B
Picture cable
The support arms support the
transmitter parallel to the exhibit wall.
Clamp segment C
Use the screw that
was removed in
step 1.
the tarnsmitter to become unstable.
Push the support arms slightly
towards each other (in the
direction indicated by the
arrows) and pull the support
arms out.
z
Support arm
9
Advertisement
Table of Contents
