Table of Contents
Advertisement
How to Mount the Infrared Address Transmitter
(continued from page 11)
An Example of "Auto Start" Method
• The transmitter should be installed for example at the entrance to the exhibit, in the path of the visitor.
Mounting fixtures A and B
(included)
M10 x 20 mm bolt (included)
7 Installation position
e
a n c
E n t r
12
Ceiling railing
Exhibit
Course
approximately 15°
Suspended hook
Power outlet or a ceiling outlet with a safety plug.
(sold separately)
• The power adaptor is inserted and then
secured by turning. This prevents the
adaptor from falling.
Turn the
adaptor
• Install the transmitter in a place where the visitors
will pass and will be facing in one direction.
• The transmitter should be positioned along the
exhibit course at about a 15° angle in the opposite
direction in which the visitors move.
Note
It is possible that under certain conditions, the Auto
Start method will fail to operate. Therefore it is not
advisable to use this system to inform the visitor of
emergency exits or any other life-saving information
that is necessary during an emergency.
Portable ROM Player
service counter
Advertisement
Table of Contents
