How to Mount the Infrared Address Transmitter
(continued from page 9)
An Example of the "Pointing" Method.
7 Installation position
• Position the transmitter close to the picture that will be explained.
• For large size pictures, it is recommended that the visitor be adequately informed as to where the Portable
ROM Player should be pointed.
Example : Instructions for the visitor, such as "Please Point the Portable ROM Player at the name of the
picture and press
7 Adjusting the Angle of the Transmitter
Exhibit wall
Within a range of 2.5 - 3 meters (8.2 - 9.8 ft)
from the ceiling, the transmitter should sit at a
5° angle in a downward direction from the
exhibit wall.
Within a range of 0 - 0.5 meters (0 - 1.6 ft) from the floor, the transmitter should
sit at a 5° angle in an upward direction from the exhibit wall.
10
" can be printed on a card and placed on the transmitter.
PLAY
In this range the transmitter can be
basically parallel with the wall.
Ceiling railing
Power outlet or a ceiling outlet with a safety plug
(sold separately)
• The power adaptor is inserted and then
Turn the
secured by turning. This prevents the
adaptor
adaptor from falling.
Optical transmission lens
• When explanation cards are attached to the
transmitter, take precautions not to cover the
optical transmission lens.
• As illustrated in the diagram
below the transmitter should be
positioned so the switches and
jacks are either up or down
when directly facing the unit.