How To Mount The Infrared Address Transmitter (Xa-Gt1Tn) - JVC XA-GC20BK Instructions Manual

How to Mount the Infrared Address Transmitter
The Infrared Address Transmitter can be secured to either a cable or a ceiling railing.
Settings for each switch
1
Setting the address
• Set the desired address with the rotary switch.
(000 - 255)
Slotted screwdriver used for clocks
(2 mm diameter - sold separately)
2
Setting the Auto/Point switch
• To enter the Auto
Start mode
A P
• To enter the
Pointing mode
A P
3
Setting the Master/Slave switch
M S
8
• Set the switch to "A"
Auto.
• Set the switch to "P"
Point
• The switch is now set
to "M" master.
Regarding connections to the power source
Example:
Connect to standard household power
outlet or a ceiling outlet with a safety
plug.
Power adaptor
(sold separately)
Connect to DC12V/0.4A
(XA-GT1TN)