Using The Timers; Setting The Clock - JVC FS-X1AC Instructions Manual

Using the Timers

* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The timers let you control listening functions automatically.
Two types of timers are available:
DAILY Timer
Use this timer to set wake up everyday to music from
any source, including melodies.
SLEEP Timer
Fall asleep and have your System turn off automatically
after a certain length of time.

Setting the Clock

When you plug the AC power cord into the wall outlet, the
time indication "0:00" and the Clock indicator (
on the display in standby (System off) mode.
You can set the clock whether the System is on or off (but
not in power saving mode (See page 11)).
• The clock must be correctly set for the timers to work.
• The clock may gain or lose one to two minutes per month.
2
CLOCK/TIMER
DAILY indicator
Clock indicator
SLEEP indicator
) blink
STANDBY/ON
CANCEL
SET
3
SLEEP
On the Remote Control
1
Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the dis-
play, also, the Clock indicator (
• If the clock is already set and the Clock indicator (
not blinking, press the CLOCK/TIMER button repeatedly
until the clock setting display appears on the display.
Each time you press the CLOCK/TIMER button, the dis-
play changes as follows.
DAILY ON?/DAILY OFF? = ON (time) = Clock setting
display* = Cancelled = (back to the beginning)
*: Select this item!
3 2
2
Press the or
Pressing the 3 button moves the time forwards and
pressing the 2 button moves it backwards. Holding
down the button moves the hour.
) blinks.
button to set the hour.
22
) is