Changing The Display Brightness; Setting The Clock; Turning Off The Power Automatically - JVC FS-G5J Instructions Manual

Changing the Display Brightness

You can dim the display window.
DIMMER
DIMMER-1 DIMMER-2
DIMMER-1
Dims the display illumination.
DIMMER-2
Erases the display illumination.

Setting the Clock

Without setting the built-in clock, you cannot use the Daily
Timer (see page 18).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL.
1
Activate the clock setting mode.
CLOCK
/TIMER
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode (see
page 18) is selected.
2
Adjust the hour.
PRESET UP
PRESET DOWN
3
Adjust the minute.
PRESET UP
PRESET DOWN
"CLOCK OK" appears and the built-in clock starts
working.
To check the current time during play
DISPLAY
Source information
14
—DIMMER
DIM OFF
(Canceled)
Remote
ONLY
REC
SET
SET
Clock
If there is a power failure
The clock loses the setting and is reset to "AM 12:00." You
need to set the clock again.
Turning Off the Power
Remote
Automatically
ONLY
To turn off the System after playback is over—
Auto Standby
A.STANDBY
When Auto Standby is in use, the A.STANDBY indicator
lights on the display.
When the disc playback stops, the A.STANDBY indicator
starts flashing.
If no disc operation is done for about 3 minutes while the
indicator is flashing, the System turns off (stands by)
automatically.
• Auto Standby only works after disc playback.
To turn off the System after a certain period of
time—Sleep Timer
1
Specify the time (in minutes).
SLEEP
10 20
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
SLEEP
• If you press the button repeatedly, you can change the shut-
off time.
REC
A.STANDBY
30 60 90 120
OFF
(Canceled)
REC
SLEEP