Finding The Beginning Of A Tune - JVC KW-XC550J Instructions Manual

Finding the beginning of a tune

Multi Music Scan allows you to automatically start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead or before the current tune.
1
During playback
When the beginning of the specified tune is located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other
side.
• In the following cases, Multi Music Scan may not operate correctly.
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions
during tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
– The Dolby NR setting does not match. For example, if the tape is recorded with the Dolby C NR.
16
1
To locate a tune ahead
of the current tune on
the tape
To locate a tune before
the current tune on the
tape
Specify how many tunes ahead of or
before the current tune the tune you
want is located.
Each time you set the tune, the number changes
up to ±9.