Table of Contents
Advertisement
Other convenient tuner functions
Scanning broadcast stations
SCAN
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO RPT (Monaural/Repeat) while listening to an FM stereo broadcast. The sound you
hear becomes monaural but reception will be improved.
MO
RPT
To restore the stereo effect, press the same button again.
When using this unit in an area other than North or South America:
You need to change the AM/FM channel intervals. See "Changing the AM/FM channel
intervals" on page 25.
10
When you press SCAN Ÿ while listening to the radio, station scanning
starts. ("SCAN" appears on the display.) Each time a broadcast is tuned in,
scanning stops for about 5 seconds (tuned frequency number flashes on
the display), and you can check what program is now being broadcasted.
If you want to listen to that program, press the same button again to stop
scanning.
Lights up when receiving an FM broadcast in stereo.
SCAN Ÿ
MO RPT
J
Advertisement
Table of Contents
