Home Decorators Collection MARTHA STEWART WSMSL-28PB Assembly Instructions

Living closet pole standard brushed nickel

Download this manual

MARTHA STEWART LIVING CLOSET POLE STANDARD

BRUSHED NICKEL

Assembly Instructions

HDC #:2954705270 MFG #: WSMSL-28PB

Please read over the instructions; it will be a

time-saver in the long run.

Note: Before Assembly, please be sure to work on a soft flat

surface to avoid any damage to the finish.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Storage

Factory No.: 15548

Page #1 of 4

Page 1 MARTHA STEWART LIVING CLOSET POLE STANDARD BRUSHED NICKEL Assembly Instructions HDC #:2954705270 MFG #: WSMSL-28PB Please read over the instructions; it will be a time-saver in the long run. Note: Before Assembly, please be sure to work on a soft flat surface to avoid any damage to the finish.
Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S SHELF MAXIMUM LOAD: 40 LBS. (18.2KG) THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED.
Page 3 Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A-25 mm Metal Pole (x 1) Hardware List Please read completely through the instructions and verify that all hardware listed are present before beginning assembly.
Page 4 Assembly Instructions 1. Align and attach Closed Pole Holder (2) to side panels of cabinet (Sold Separately) using three M4 x 16 mm Short Screws (4) through holes on holder into the pilot holes, as shown in figure below. Repeat for Open Pole Holder (1). Note: Ensure the flat edge of the Closed Pole Holder (2) is level before tightening the screws completely.

2954705270