Maintenance - Uniflair RAN Series Instruction Manual

• Regularly check the state of the dry cooler fins; remove from them all foreign objects (leaves, feathers,
seeds, dust, etc.) using a jet of compressed air.
The heat exchanger fins are made of thin aluminium sheet and can cause cuts in the event of
the accidental contact.
• Check that the operation and current absorbed by each fan is normal and without any unusual noises;
• Check that the control device and sensor are operating normally.
RAN-RAL - Rev 1.0. - 11-10-2002 IT - EN
MANUALE DI ISTRUZIONI / INSTRUCTION MANUAL

MAINTENANCE

опубликовано topclimat.ru
RADIATORI REMOTI / DRY COOLERS
31 (32)