Description And Use; Nameplate - Uniflair RAN Series Instruction Manual

MANUALE DI ISTRUZIONI / INSTRUCTION MANUAL
RADIATORI REMOTI / DRY COOLERS

DESCRIPTION AND USE

Remote dry cooler with axial fans for outdoor installation, fully factory assembled and tested. The dry cooler can
be installed in a vertical position with horizontal air flow or in a horizontal position with vertical air flow. Units can
be equipped with either a fan speed regulator control with an ON/OFF switch type or a modulating speed
control.
Case: self supporting and constructed entirely in aluminium for outdoor installation in demanding operating
conditions.
Fan motor: of the axile type, electric motor is of the outside-rotor type, protection grade IP54, CLASS "F",
offering the opportunity for a stepless speed adjustment via a TRIAC voltage controller. Safety protection grilles
fitted on the fans comply with safety standards.
Finned Coil: with large frontal area for an efficient air distribution, constructed of copper tubes mechanically
expanded into aluminium fins for maximum exchange efficiency.
Hydraulic connections: GAS type connections, located on one side of the dry cooler for a rapid and secure
connection.
Electrical Panel: main Switch in an IP 54 box, the electric connection box is easily accessible from the outside.
Speed regulator device either modulating or ON/OFF control (option).

NAMEPLATE

The nameplate, located dry cooler, contains the following data:
on
• Unit model;
• Serial number;
• Year of manufacture;
• Current and power absorbed;
Standard settings.
•
опубликовано topclimat.ru 20 (32)
RAN-RAL - Rev 1.0. - 11-10-2002 IT - EN