Symbols Used; Safety Instructions - Uniflair RAN Series Instruction Manual

SYMBOL MEANING
DANGER
IMPORTANT WARNING
LIVE COMPONENTS – RISK OF
ELECTRIC SHOCK
• Read the instruction manual carefully before carrying out any work on the equipment.
• The dry cooler is factory precharged with dry nitrogen to 2 bar(model 2300...5700). Before removing the
plugs from the inlet and outlet connections for installation, discharge the nitrogen by means of the valve on
the inlet manifold.
• The dry cooler contains gas above atmospheric pressure: tampering with connections or pipework can cause
leakage of compressed liquid.
• INSTALL THE DRY COOLER IN A POSITION WHICH IS INACCESSIBLE TO UNAUTHORISED
PERSONNEL: the fins of the heat exchanger are made from thin aluminium sheet and can cause cuts in the
event of accidental contact.
• The dry cooler contains live electrical parts and rotating devices: before carrying out any work on the
electrics or on the fan, isolate the unit (turn optional isolator to position 'O')
• All service and maintenance operations which require access to the inside of the unit while it is in
operation must be performed by qualified and experienced personnel who are aware of the
precautions which must be taken.
• In the event of fire, water and other conductive substances must not be used to put out the fire near live
electrical components. This warning must be displayed on notices in the unit installation location.
Make sure that the power supply voltage corresponds to the value shown on the data plate.
RAN-RAL - Rev 1.0. - 11-10-2002 IT - EN
MANUALE DI ISTRUZIONI / INSTRUCTION MANUAL

SYMBOLS USED

SYMBOL

SAFETY INSTRUCTIONS

опубликовано topclimat.ru
RADIATORI REMOTI / DRY COOLERS
MEANING
MOVING PARTS
SHARP SURFACES
18 (32)