Working Space; Size Of Hydraulic Connections - Uniflair RAN Series Instruction Manual

Indicated in fig. 3, minimum recommended distance to be left clear for a correct unit function and to allow
access to the unit for maintenance.
> 0,7 m
Fig. 3.a.: HORIZONTAL AIR FLOW
INSTALL THE DRY COOLER IN A POSITION WHICH IS INACCESSIBLE TO UNAUTHORISED
PERSONNEL:
The heat exchanger fins are made from aluminium sheet which is only 0.1 mm thick and could
cause cuts in the event of forceful accidental contact.
N.B. the fan characteristic does not allow any ducting of the air flow.
The dry cooler has male GAS
connections.
Female valves must be connected
to the male gas
(inlet/outlet) placing a seal between
connections.
NB: the diameter of the hydraulic
line that connects the unit to its
remote dry cooler (De) must be
chosen according to the length of
the hydraulic line itself.
RAN-RAL - Rev 1.0. - 11-10-2002 IT - EN

WORKING SPACE

> 4 m

SIZE OF HYDRAULIC CONNECTIONS

GAS connections.
connections
1 ¼" male (0360-0510)
1 ½ " male (0700-0750)
2 " male (1000...2300)
3 " male (3600-5700)
опубликовано topclimat.ru
MANUALE DI ISTRUZIONI / INSTRUCTION MANUAL
RADIATORI REMOTI / DRY COOLERS
> 1 m
Fig. 3.b.: VERTICAL AIR FLOW
Fig.4.
> 4 m
> 1 m
D
e
Fig.5.
22 (32)