Samsung Flip WM55B User Manual page 71

Anynet+ issues
The connected device is not displayed.
Other issue
The product smells like plastic.
Small particles are found on the edges of the product.
When I try to change the PC resolution, a message
"The defined resolution is not currently
appears.
There is no sound from the speakers in HDMI mode
when a DVI-HDMI cable is connected.
HDMI Black Level is not functioning properly on an
HDMI device with YCbCr output.
There is no sound in HDMI mode.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC)
External Device Manager.
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is connected to your product
with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please repeat the device scan.
The plastic smell is normal and disappears over time.
The particles are part of the product design. The product is not defective.
The message "The defined resolution is not currently
supported." resolution exceeds the maximum resolution of the product.
To resolve the issue, change the PC resolution to a resolution supported on the product.
DVI cables do not transmit sound data.
This function works only when the HDMI signal of the external device is RGB output.
Displayed picture colors may not look normal. Video or sound may not be available. This
can occur if a source device that only supports an older version of the HDMI standard is
connected to the product.
is set to On in Menu → SETTINGS →
supported." appears if the input source
71