Samsung Flip WM55B User Manual page 22

Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Set Network Type to Wired from the
2
The network connection screen appears, and the verification process starts.
3
When the connection has been verified, the
screen.
4
Tap OK.
" If the connection process fails, check the LAN port connection.
" If the automatic process cannot find the network connection values or if you want to
set the connection manually, go to the next section,
(Wired)".
Manual Open Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway
and DNS server address. Enter these values manually.
Getting the network connection values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support tab, click the Details button. The Network connection values are
displayed.
Open Network Settings page.
OK button appears on the bottom of the
"Manual Open Network Settings
How to set up manually
1
Set Network Type to Wired from the
2
The network connection screen appears, and the verification process starts.
3
Select Cancel while network connections are being attempted. This will stop the
connection.
4
Select IP Settings on network connection screen. The
5
Select the field at the top and then set
" Setting IP setting to Enter manually
manually.
6
Enter the IP Address, Subnet mask, Gateway, and
7
When done, select OK at the bottom of the page. The network test screen appears and
the verification process starts.
8
When the connection has been verified, the
screen.
9
Tap OK to complete the setting.
Open Network Settings page.
IP Settings screen appears.
IP setting to Enter manually.
automatically changes DNS setting
DNS Server values manually.
OK button appears on the bottom of the
to Enter
22