Samsung Flip WM55B User Manual page 70

Anynet+ issues
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Disconnecting Anynet+
appears on the screen.
The Anynet+ device does not play.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC)
External Device Manager.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (initial setup)
If you have removed and then reconnected the HDMI cable, please make sure to search
devices again or turn your product off and on again.
Check if the Anynet+ function of the Anynet device turns on.
Check if the Anynet+ device is properly connected to the product and check if
(HDMI-CEC) is set to
Press the SOURCE button on the product remote control and select a non-Anynet+ device.
device..." You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
Use the remote control after the product has completed Anynet+ configuration or has
finished switching to Anynet+.
You cannot use the play function when initial setup is in progress.
is set to On in Menu
On in Menu → SETTINGS → External Device
→ SETTINGS →
Anynet+
Manager.
70