Table of Contents
Advertisement
2.2 Tighten the four screws on the pump bracket. When the belt is worn or broken, replace
the belt.
3. Adjust distance of scraper
3.1Remove the scraper, erasing all dust, mud and asphalt.(Graph 5)
3.2 Install scraper onto braket again, Fixed for properly cleaning roller
4. Water tank
4.1 Drain all the water and clean the inside of the tank.（Graph 6）
5. Moving parts
Lubricate drive / vibration wire rod end.
Graph 4
Graph 5
Graph6
11
Advertisement
Table of Contents
