Other Functionality - Dimplex DCTF3HCP Instruction Manual

Operation
7. Press the PURIFICATION/SLEEP MODE button to enable the device to begin puri-
fying the air or enable sleep mode. In PURIFICATION mode, the device will work to
detect the air quality. If the air quality is excellent, the indicator light will be green. If
the air quality is good, the indicator light will be yellow. If the air quality is poor, the
indicator light will be red. Based upon the air quality, the unit will work automatically
to purify the air, remove germs and antigens and allow for quality air in the room. To
enable SLEEP MODE press and hold this button for three seconds. The display will
show the moon and star logo when this function is switched on. In this setting, the
device will work quietly in low speed. To turn off the PURIFICATION function, simply
press this button again, and to turn off the SLEEP MODE function, press this button
again for three seconds.
Note: When you switch the device off, it will take up to 15 seconds for the fan speed to
come to a complete stop.

Other Functionality

This device has a TILT SWITCH function. Should the product tilt or fall over, it will au-
tomatically shut off for precautionary measures and to prevent a fire. To turn back on,
place the product back into position and press any function key.
11